Blog

November 6, 2026

Why choose ASTEX Panel over traditional sound absorption systems?

What are ASTEX Panels?

Astex Panels are manufactured from a high density compression resistant mineral wool, the front and rear of the panels shall be tissue faced. The edges are hardened with non-combustible sealant prior to wrapping on 5 sides and returned on the rear with fire retardant acoustically transparent fabric, in accordance with the ID Consultants requirements.

The panels are factory made, typically bespoke, ie cut-to-size, thickness, shape, edge detail and can incorporate client’s fabric.

Figure 1

On site, the panels delivered ready for fast and easy installation. They are sufficiently flexible to fit around services or other obstructions, even accepting small irregularities in the wall.

Application

ASTEX Panels are installed to provide an effective means of controlling reverberation time and reflected sound in studios, conference centres, auditoria and offices and where high acoustic absorption combined with an aesthetically pleasing appearance is required.

Sagging of Mineral Wool

High density mineral wool is used to manufacture ASTEX Panels, making them rigid and not susceptible to sagging. For comparison, please see Figure 2a ASTEX Panels with Figure 2b, a timber framed insulation with fabric stretched across the front surface. The panels in Figure 2b were not yet handed over.

Figure 2a: ASTEX Panel installed without any framework
Figure 2b: Fabric wrapped panels. The insulation is sagging (top left)

Due to the sagging of the insulation, the panels in Figure 2b were removed and ASTEX Panels were used to replace them. 

Acoustic Performance

The panels have been tested in accordance with BS 3638 using random incidence noise source against a solid backing achieving the following performances:

ThicknessSound Absorption Coefficient
(mm)125 Hz250 Hz500 Hz1000 Hz2000 Hz4000 Hz
25mm panel (with Solid Backing)0.110.330.680.971.061.03
50mm panel (with Solid Backing)0.320.731.011.040.980.97

The above 2 tests are only part of over 50 independent laboratory acoustic tests proving the exceptional absorption performance of ASTEX Panels.   

Compression Resistance

Figure 3: 80kg/m³ fabric wrapped mineral wool installed on a wall

ASTEX Panels incorporate high density mineral wool. The mineral wool prior to hard edging has a mean compression resistance when tested to EN 826, Sigma 10%, of 88.6kPa, in other words it is difficult to compress, dent or damage the panels.

Low and medium density mineral wool and fiberglass,  like the one shown in Figure 3, have significantly low compression resistance making them easily damaged when touched or  compressed.

Fire Test Performance

Figure 4: ASTEX Panel composition

Figure 4 shows the ASTEX Panel composition, with the exception of the fabric all the materials are either non-combustible or of limited combustibility comply with all applicable life safety, building and fire ratings including surface spread of flame characteristics.ASTEX Panel have been tested to the following:-

  1. SIRIM tested to:-
  • BS 476 Part 6: Index less than 12
  • BS 476 Part 7: Class1

Aging

Figure 5a: Typical timber framed solution installed on 29 June 2012
Figure 5b: The same project on 24 April 2013

Figure 6a: ASTEX Panels installed on 25 July 2009

Figure 6b: The same project on 26 April 2013

Installation

Acoustic
About wilhamsadmin